Gazer VC700-UCON/IN video interface is a device that allows connecting video and audio sources such as a rear view camera, a front view camera, a surround view system, a T2 TV tuner, as well as other audio and video equipment to the stock UConnect 8,4" All-in-one head unit of Dodge: Ram, Dart, Durango, as well as Jeep Cherokee and Chrysler vehicles. With Gazer VС700-UCON/IN video interface installed, your Jeep, Chrysler or Dodge will get all these extra options, while the car's stock UConnect 8,4" All-in-one multimedia system will remain intact and fully operational.
Features and advantages
The key advantage of Gazer VC700-UCON/IN video interface is that it allows connecting additional video sources to your Jeep, Chrysler or Dodge's UConnect 8,4" All-in-one head unit. As a rule, the stock multimedia system does not allow connecting third-party audio and video systems such as a rear view camera, a front view camera, or a surround view system. In some cases, the stock head unit does not even have input jacks required for connection of auxiliary equipment. However, it does have a display and a sound amplifier, which makes it reasonable to use the stock UConnect 8,4" All-in-one multimedia system for video and audio output. One can use Gazer VC700-UCON/IN video interface to transmit analogue video and audio signals to the stock multimedia system streaming video to Jeep, Chrysler or Dodge's stock display and audio – to its built-in sound system.
When installing Gazer VC700-UCON/IN video interface, the driver gets some extra safety assistants – ability to connect a rear view camera, a front view camera, a surround view system, and a parking assist system capable of showing guidelines drawn by the stock parking sensor on the video from the cameras. Two extra audio-video inputs allow connecting a DVR or an entertainment system such as a digital T2 TV receiver, an external DVD, or a media player as well as a game console or a karaoke machine to your car's stock UConnect 8,4" All-in-one multimedia system.
Installation and controls
Gazer VC700-UCON/IN multimedia interface supports Plug&Play (Pin-to-Pin) installation and connection without damaging the vehicle's stock wiring. One must install the video interface behind UConnect 8,4" All-in-one display and use the stock cable to connect it to the multimedia system and CAN bus. Once the interface is enabled, the multimedia system changes its operating mode and your Jeep, Chrysler or Dodge's stock display starts showing video feed from Gazer video interface.
The interface can also be connected to the audio system using the stock AUX input. Alternatively, you can use an external speaker included into the standard supply package.
You can enable Gazer VC700-UCON/IN multimedia interface and switch between audio and video sources using the vehicle's stock button (NAVI, TEL, Voice) or the additional external button included in the supply package in case your Jeep, Chrysler or Dodge does not have a stock navigation control button. The rear or surround view camera mode is enabled automatically each time the car shifts into reverse gear.
Connecting cameras, surround view system, and parking assistant
Gazer VC700-UCON/IN video interface allows connecting and using such important security systems as a rear view camera, a surround view system, and a parking assistant.
When Gazer rear view camera or surround view system is installed, the image displayed on the screen will have a special overlay with the vehicle's trajectory (IPAS function). The parking guidelines will indicate the vehicle's driving direction depending on the steering wheel position.
If your Jeep, Chrysler or Dodge does not have OEM parking sensors, you can install Gazer parking assistant, and VC700-UCON/IN multimedia interface will display the information from it just as it would from the factory-installed parktronic system.
Gazer surround view system will ensure maximum safety when parking and maneuvering in a confined space by showing what happens around your car in the "top-down perspective" without any blind spots and time lag. For example, such driving tasks as parking near high street curbs, crossing a narrow bridge, or maneuvering among short polls or flowerbeds will become perfectly easy and safe posing no danger for pedestrians and your Jeep, Chrysler or Dodge. This system can also act as a DVR and a CCTV system by recording not only when the car is on the move but when it is parked as well. A signal from the G-sensor triggers the recording.
Connecting additional audio and video sources
Gazer VC700-UCON/IN multimedia interface allows connecting two additional audio-video sources to Jeep, Chrysler or Dodge's UConnect 8,4" All-in-one multimedia system. You can connect a digital TV tuner, a DVR, and an external DVD or a media player, as well as such entertainment systems as a game console or a karaoke machine. Video and sound will be transmitted via Jeep, Chrysler or Dodge's stock multimedia system integrating the additional equipment as a new option for your vehicle.
Type of connection
Original touch panel
Original speakers / AUX / External speaker
OEM button / External button
Rear camera connection
Front camera connection
* Depends on car model